5 Star Anycubic Photon Mono 2

6.6 4K HD screenANYCUBIC Photon Mono 2 uses a 6.6-inch monochrome LCD screen with a resolution of 40962560, which can display the modelstiny details. This can fully meet the printing needs of miniature models, and is a very good choice for upgrading from FDM printers to LCD printers. Upgraded LighTurbo MatrixCompare with ordinary matrix light source, Anycubic LighTurbo matrix provides a more stable and uniform parallel light source, which can effectively reduce the layer lines and eliminate grid lines. Therefore, Photon Mono 2 can make the model details more vivid and the model surface delicate and smooth.. Larger Build VolumeThe printing volume of Photon Mono 2 is 165x143x89mm, which is larger than that of Photon Mono 4K of the same machine size. It can meet the needs of saving placement space and printing large models.. High Printing Success RatePhoton Mono 2 adopts laser engraved platform. It has excellent flatness, which can increase model adhesion and greatly improve printing success rate. And LCD Screen protector has also been enlarged to better protect the screen from accidents such as resin leaks and scratches.. New Version Slicing SoftwarePhoton workshop 3.0 has enhanced and upgraded core features such as slicing, punching, support adding, shells extracting, and model arrangement. It has a more straightforward slicing process and a new UI interface that is easier to operate..

6.6'' 4K Monochrome LCDANYCUBIC Photon Mono 2 adopts a 6.6inch 4k monochrome LCD screen with a HD resolution of 40962560, which can better restore 3d printing models and present more subtle details. The ultra-large scratch-resistant screen protector helps to prevent screen scratches and resin penetration. With up to 95 light transmittance, it can fully protect the LCD screen while ensuring printing accuracy.. Larger Print VolumeANYCUBIC Photon Mono 2 resin 3d printer has a printing size of 143x89x165 mm5.6 x 3.5 x 6.5, 20 larger than Photon Mono 4K, the exposure time of single-layer printing is shortened to 1.5s-3s, greatly saving your time and improving printing efficiency. Photon Mono 2 providing users with more space and freedom to create freely.. Upgraded LighTurbo MatrixThe upgraded LighTurbo matrix adopts a high-precision texturing optical lens, provides a stable and uniform parallel light source, thus effectively reducing the layer lines and eliminating grid lines. Therefore, Photon Mono 2 resin 3d printer can make the model details more vivid and make the model surface delicate and smooth.. Photon Workshop Slicer 3.0Anycubic's newly self-developed Photon Workshop 3.0 slicing software will be included with the purchased Photon Mono 2 resin printer, which is free to use permanently. It has enhanced and upgraded core features such as slicing, punching, support adding, shells extracting and model arrangement. It also adds various features , such as model repair, significantly improving the slicing efficiency and printing success rate.. Laser-engraved Build PlateMono 2 is equipped with a laser engraved platform, which has excellent flatness that can increase model adhesion, making the 3d model hard to drop and warp. When printing on Photon Mono 2 using different resins, its recommended to match the corresponding printing parameters, helping you experience a higher printing success rate..

The FEP is 2 pcs package, and suitable for Anycubic Photon Mono 2.. Quick install, The release film comes with a ring, No need to disassemble the ring and cut the FEP film. The entire installation process only takes 3 minutes. and there is an easy-to-follow tutorial on the package that guiding you to better replace the FEP film.. As the FEP film is an consumable, regular replacement will make your printing effect better. If you have any questions, please feel free to contact us..

Protect LCD screen, the anti scratch film can effectively prevent damage to the LCD screen caused by resin leakage or resin curing directly above the screen, and also prevent screen scratches during the movement of the resin tank. Packaging information, this package provides 5 anti scratch films and comes with the same number of auxiliary sets, which are perfectly suitable for Anycubic Photon mono 2.. Installation, install in a clean environment, please use the auxiliary set to clean the LCD screen before Installation. A certain amount of bubbles will appear during installation, and stuff like plastic shovels can be used to push away the bubbles. As long as there are no bubbles on the screen position, it will not affect printing..

The original resin vat of Photon Mono 2 with pre-installed release film, 1PCS. The resin tank has scale lines from 230 ML to a maximum of 390 ML. Please do not add more resin than the maximum scale.. Specially designed inclined port to avoid spillage of remaining resin when pouring back into the bottle. The integrated release film adapted to the photon mono 2's vat is easy to replace, without the need for cutting or drilling the release film. Simply unscrew the bottom screw, align the release film with the bottom screw hole, and then tighten it.. It will be the perfect spare resin tank when you want to fast change colors to start printing..

Compatible Models Screen Protectors for Anycubic Photon Mono 2 LCD Resin 3D Printer.. Easy to Install This screen protector film kit includes tool kit to make it easier to install the screen protector.. High-quality materials The screen protector is made of PET material with excellent optical properties, and the light transmittance of up to 95 ensures that the quality of the printed model is not affected.. Resin 3D Printer Screen Protector Replacing the screen of a resin 3D printer is an expensive expense. This screen protector kit can effectively avoid resin spillage.. Install Tips The screen protector is designed according to the size of the screen. In order to avoid air bubbles during installation, the edge will be slightly smaller than the screen. If the shading tape around the screen is too large, you need to remove the shading tape and install the protective film, and then reattach the shading tape..

Entry-level 3d Printer, Photon Mono 2 features a 6.6-inch monochrome LCD screen with a resolution of 40962560, which is more than enough to show off the details of character figures as well as some miniatures. Also upgraded the size of the screen protector to avoid machine damage caused by resin leakage.. Upgraded Print Volume, compared to the previous generation Photon Mono 4K, the Photon Mono 2 has increased the actual printing area by 20 under the same machine size, to 6.49 '' x 5.62 '' x 3.5 '' HWD, to meet as many printing needs as possible.. Reducing Layer Lines, the upgraded LightTurbo matrix can provide stable and uniform parallel light sources, effectively reducing layering and eliminating grid lines. Therefore, the printed model has a smoother surface and better expression of details.. Print Platform Upgraded, Photon Mono 2 uses a laser engraving platform with excellent flatness that can increase the adhesion of the model and greatly improve the printing success rate.. New Slicing Software, The new version of the slicer 3.0 has enhanced and upgraded core features such as slicing, punching, support adding, shells extracting, and model arrangement. And a more straightforward slicing process and a user-friendly interface.

Screen Protector Screen protector can prevent the resin from contaminating the screen when FEP damaged, and prolong the use time of the LCD screen and saving the cost of replacing the screen.. Light transmittance of more than 95 The light transmittance of the screen protective film is above 95, which will not affect the 405nm wavelength of ultraviolet rays through the protective film and curing the resin, which can maintain the printing accuracy of the 3D printer.. High quality screen protectior Screen Protector is made of high-quality PET material imported from Japan. The double-sided protector films ensures that it will not be scratched before use, and the edge will not produce white edges after being posted. Therefore, it will not affect the print volume after installation, and only needs to be re-leveled.. Included tool kit This kit comes with a tool kit for easy installation of the protective film, you can refer to the installation steps in the picture to operate, and use the scraper to avoid air bubbles during the installation process.. Compatible Models Screen Protector is compatible with Anycubic Photon Mono 2 LCD Resin 3D Printer..

This resin tank kit is only compatible with Anycubic Photon Mono 2.. Package Included 1 Pack resin VAT for Mono 2. screw is not included. Upgraded Design Pour spout update the original resin tank, it would not overflow when you pour it out of the resin vat.. The FEP film is pre-installed, it's very easy to install the resin tank for Mono 2. It can be resistant to high temperatures up to 204 and is with over 95 light transmittance.. Please level the machine after installing the resin tank, then it'll have a good result..

The FEP is suitable for Anysub Photon Mono,Mono 4K, Photon Ultra, Photon D2, but not for Photon Mono 2. Film dimensions 173x115.4 mm Film Thickness 0.15mm, light Transmittance 95. Quick install, The release film comes with a steel ring, No need to disassemble the steel ring and cut the FEP film. The entire installation process only takes 3 minutes. and there is an easy-to-follow tutorial on the package that guiding you to better replace the FEP film.. High-quality materials, resistant to high temperatures 204 C, Chemically resistant, Ultimate non-stick surface, UV stable. As the FEP film is an consumable, regular replacement will make your printing effect better. If you have any questions, please feel free to contact us..