5 Star Diy Oscilloscope Kit

Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board.. Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting.. Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc.. The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component , and chip component training.. The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled by yourself..

The kit uses ARM Cortex-M3 processor STM32F103C8 and contains a 2.4-inch color TFT display, which can be used as an ARM development test board. High-definition display. Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting.. DSO138 oscilloscope is partially open-sourced. Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc.. The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training.It's easy to assembly. The oscilloscope kit is specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..

Scope 3406D MSO 4 channel, 200 MHz, 8-bit mixed signal oscilloscope with probes. 200 MHz analog bandwidth. 512 MS buffer memory. 4 Analog Channels. 16 channel logic analyzer MSO models.

PROFESSIONAL AUTOMOTIVE OSCILLOSCOPE Designed for vehicle diagnostic to inspect over 80 items including ignition, sensors, engine, startup and charge. Simply select from the preset modes, run the tests and read from the high-resolution colour LCD display screen.. FOUR INSTRUMENTS IN ONE Automotive multimeter tester, oscilloscope, DMM and waveform generator in one device. Dual channel with real-time sampling-rate 250MSas and optional bandwidth limit 20MHz. The recording function allows it to save and recall waveform easily for reference and comparation . PC connectivity available for further analysis and diagnosis.. HANDHELD COMPACT SIZE The scope fits in palm and is convenient to operate with single hand, which makes it practical for quick checks and field work. The built-in rechargeable battery can work for as long as 24 hours continuously after 2 hours charging.. FRIENDLY USER INTERFACE Versatile functions with easy-to-read display and intuitive controls. Switch to different modes and functions swiftly with simple buttons. Automatic adjustment with Auto Set Key, which can adjust the horizontal and vertical scales as well as trigger coupling, type, position, slope, level and mode automatically for a stable waveform display.. READY TO USE Please choose from the sets with different accessories provided. The oscilloscope comes with detailed instructions. Applicable PC software ready for download on Hantek Official. If you need any help, please feel free to get in touch with us..

One-Key AUTO Perfect Trigger ModeEquipped with efficient one-key automatic function, the measured waveform can be displayed without complicated adjustment. All parameters can be set automatically with one key to quickly measure the waveform. Press and hold the AUTO key to quickly calibrate the baseline. It has full trigger function. Automatic trigger test cycle analog signal. Single trigger test sudden aperiodic signal. Normal trigger test digital logic signal.. Compact and Portable Firmware UpgradeFNIRSI 138 PRO is an upgraded mini digital handheld oscilloscope with high cost performance. Smaller size, stronger function, upgraded one-key calibration function, improved test parameters, and supported the interface to directly update firmware. It can measure voltage up to 400V.. Built-in Battery Universal BNC InterfaceBuilt-in 1250mah high-quality lithium battery, which can be used continuously for about 5 hours when fully charged. Type-C supports data transmission and charging.. High-precision Real-time Display HD LCD ScreenThe real-time sampling rate of the oscilloscope is 2.5MSs and the bandwidth is 200KHz. With PWM square wave output, frequency range amplitude 3.3V. Square wave 0-80khz. The duty cycle is 0-100. The display is equipped with a 2.4 inch HD LCD screen, the resolution is 320 240.. Widely UseFNIRSI-138 PRO is a practical and cost-effective MINI handheld oscilloscope, mainly for the maintenance industry and RD education industry. It is widely used in many fields, such as auto repair, DIY, home appliance repair, measuring electricity, experimental teaching, etc..

Dual-channel oscilloscope DIY kitThis product is the latest dual-channel handheld touch screen digital oscilloscope on the market, it has dual-channel, high sensitivity, can be controlled through the serial port, built-in signal generator, PC upload data, USB or battery charging Features. Color touch screen Adopt 2.4 inch TFT color touch screen, which is more convenient to carry and work. The products have passed CE certification and are of reliable quality.. Built-in signal generator In addition to a dual-channel oscilloscope, this product also has a built-in 0-20KHz sine wave DDS dual-channel function signal generator. Only advanced oscilloscopes provide built-in function generator and X-Y drawing functions.. Controlled via serial port The oscilloscope and signal generator can be controlled via serial commands, which facilitates integration with the user system for automatic measurement.. Data transmission The measurement data can be output from the serial port in CSV format, which is convenient to upload to the PC for processing it adopts USBbattery power supply methods, and the product package has instructions.

It is simple to finish assembling the oscilloscope case kit pieces. It does fit like a glove. diymore oscilloscope acrylic case will offer excellent protection while maintaining the beauty of your digital oscilloscope. Note The Kit doesn't include the oscilloscope, wish you could understand. It is a function of design which this fits, all the parts were cut correctly and fit perfectly when assembled. Acrylic material, looks transparentneed to tear down the film.

Multifunctional Detection Mivofun DSO-TC2 tester cleverly integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one, more practical functions.The Oscilloscope mode can test the signal waveform of the circuit, and supports connection with the computer, you can refresh the official firmware by yourself to complete the upgrade.. Compact DesignEquipped with large-size color dot matrix TFT display screen, built-in rechargeable lithium battery, brings users more convenience with its compact size, and at the same time has good portability.. Hidden integrated standCreative humanized design, freely shrinkable, supports 90-degree rotation, does not occupy the volume, portable and practical for detecting.. Professional Designed Real-time sampling rate of 2.5MSs 200kHz bandwidth Equipped with high-efficiency-key AUTO, the measured waveform can be displayed without tedious adjustment complete trigger function Single, Normal, Automatic,can be used freely for both periodic and aperiodic digital signals. can measure up to t 400V voltage signal.. Transistor Test Especially suitable for fast pairing of transistors, identification of miscellaneous surface mount, non-character components, preliminary screening of small batch components, including NPN and PNP transistors, N-channel and P-channel FETs, junction FETs, diodes, dual diodes, thyristors, etc., as well as resistance..

Build your own color oscilloscope Basic through-hole soldering skills are required surface mount parts are pre-soldered to PCB. Purchase includes full oscilloscope kit with parts, 100MHz oscilloscope probe, additional alligator clip probe, and ESD-safe mat for protecting your desk while soldering. Printed instructions, troubleshooting guide and schematic are also included. Contains a 2.4 color TFT LCD 320x240 display. We speak your language Need help Contact Nooelec for assistance.