5 Star Electrical Meter

CL120 Clamp Meter measure AC current via the clamp, and ACDC voltage, resistance and continuity via test leads. Meter has backlit LCD for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated. RT210 detects the most common wiring problems in standard and GFCI receptacles. A convenient chart on RT210 helps determine wiring conditions open ground, reverse polarity, open hot, open neutral, and hotground reversed. NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications. Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function. ET40 tests AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages.

Automatically measures volts ac and volts dc with precise digital resolution. Displays resistance to 1000. Easy and accurate OpenJaw current measurement. Optional holster attaches to a belt and neatly stows test leads. Can stay connected much longer than solenoid type tester.

Tester measures up to 1000V ACDC voltage, 10A ACDC current and 40M resistance plus temperature, capacitance, frequency, duty-cycle, test diodes and continuity. Digital Mulimeter has CAT IV 600V CAT III 1000V safety rating. Built to endure a 6.6-foot 2 m drop and withstand daily wear and tear on the job site. Low battery indicator and easily accessible battery and fuse replacement compartment. For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations.

Measures AC current and NCVT via clamp and ACDC voltage, resistance, and continuity via test-leads, and temperature with thermocouple. Non-contact voltage tester integrated into the clamp jaw. Backlit LCD for ease of viewing in low light. Automatically ranging True Root Mean Squared TRMS measurement technology for accuracy. Test lead holder on side of clamp and optional magnetic hanger for meter Cat. Nos. 69445 or 69417 for hands free operation. Measures temperature with a K-Type thermocouple probe. Auto-Range, Hold, Data Hold, and Max value.

Detects all three types of EMF pollution AC magnetic, AC electric, and RFmicrowave. Displays signal level, peak level, and a fast indicator bar for pulse monitoring. AC magnetic, AC electric, RFMicrowave measures total RF signal but NOT frequency. AC fields can measure standard measurements or weighted proportional to current induced in the human body. Made in USA 1-Year Manufacturer Warranty.

Measure voltage with or without test leads. Be safer Measure voltage to 1000V through the open fork, without test leads. Be faster Not need to open covers or remove the wire nuts simultaneously measure voltage and current. Be more efficient Simultaneously measure voltage and current. Be everywhere 17.8 millimeter opens fork is widest in the industry Measure up to 200 am on 40 wires 120 Mm2.

VoltAlert technology for non-contact voltage detection. AutoVolt automatic ACDC voltage selection. DC millivolts - Range 600.0 mV, Resolution 0.1 mV. Low input impedance helps prevent false readings due to ghost voltage. Large white LED backlight to work in poorly lit areas. True RMS for accurate measurements on non-linear loads.Operating temperature-10C to 50C.Battery life400 hours typical, without backlight.

Clamp Meter with automatically ranging true mean squared TRMS technology for increased accuracy. Test leads measure ACDC voltage, resistance, continuity, frequency and capacitance and tests diodes. Thermocouple probe measures temperature. Low Impedance LoZ mode for identifying and eliminating ghost or stray voltages. CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating.

Accurately Measures ACDC voltage, only for AC current not for DC current, resistance, and also provides diode and continuity tests. Jaw Opening the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit. Additional Features data hold, max reading, and an easy-to-read large LCD. Easily Carrying comes with a handy carrying pouch, perfect for use while you're on the go. Sleep Mode automatically enters sleep mode after 15 minutes of inactivity for energy conservation.

Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V. Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2 with a resolution of 0.01mA. Clamp with 4.5mm 0.177 inches jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications. Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal. Meets EN and IEC safety standards 61010-1 and 61010-2-032. Dual backlit display with both mA measurement and percent of 4 to 20 mA span. Measurement spotlight. Measure up to 99.9 mA range non-contact. Automatic power off. 4 to 20 mA scaled output.