5 Star Nanovna

2022 UPGRADED HW V3.6 NEW HW VERSION V3.6 with MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable original PCB needs OTG cable, see a clear HD image on your phone. Added a case, which is protective and dust-proof. Disply 2.8 inch TFT 320 x240. IMPROVED FREQUENCY ALGORITHM The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. MULTIPLE FUNCTIONS The default firmware main function is used for antenna performance measurement. The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. Designed a practical and simple control application on PC, you can download touchstoneSNP files for radio design and simulation software. STRONG AND SECURE POWER SUPPLY This VNA is battery powered or USB powered Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.. NOTE Our nanovna is only compatible with low-speed and supports SPI mode SD card for now Package include NanoVNA host with battery display 2.8 inch TFT x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1.

Upgraded Nanovna-H4 HW V4.3AURSINC NanoVNA-H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, with 1950mAh battery powered or USB powered. With latest HW 4.3 version, Nanovna-H4 is added a brand new panel plus added a new SD port for data storagesupport up to 32GB memory card, not included in the package. Improved Frequency AlgorithmThe improved frequency algorithm of NanoVNA-H4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. Used it to check out new cable or antenna installations and to routinely adjust the RF tuner for optimum. Antenna Performance MeasurementThe default firmware main function for NanoVNA-H4 vector network analyzer is used for antenna performance measurement. It has good RF performance for S-parameter measurements as previous models.The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. PC Control MicroSD Card PortUsing PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone snp files for various radio design and simulation software through PC software. And with MicroSD card port to save measurement data or screenshots at any time. This is quick accurate tests in the field just stand-alone, saving data or screens to a MicroSD card. What are IncludedNanoVNA-H4 host with 1950mAh battery x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit OPENLOADSHORT x1, SMA female to female connector x1. NOTE the Nanovna is only compatible with the low-speed and supports SPI mode SD cards for now. It is very efficient vector testing for ham radio operator, research electrical engineer and antenna builders.

2022 UPGRADED NANOVNA ANALYZER SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very handy smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.. BUILT-IN MICRO-SD PORT TIME DISPLAY The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. Not include in the pacakge.In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.. IMPROVED FREQUENCY ALGORITHMThe Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.Great for trouble shooting antennas and improving performance.. PC CONNECTION TXRX FUNCTIONThe vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone snp files for various radio design and simulation software through PC software.In addition,the default firmware is mainly used for antenna performance measurement. The TXRX method can measure the complete S11S21 parameters need to manually replace the transceiver port wiring.. Abundant AccessoriesEquipped with 1x NanoVNA-H4with 1950mA-h battery, 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration. Note The function of the versions 4.24.3 is the same, it will be shipped randomly..

This is a DIY product that provides perfect vector network measurement capabilitiesno enclosure. The metal shield no enclosurefor tiny vector network analyzer is designed to reduce the external interference and improve the measurement accuracy. Designed a practical and simple control application on PC, you can download touchstoneSNP files for radio design and simulation software. Added a case, which is protective and dust-proof. Disply 2.8 inch TFT 320 x240. The default firmware of AURSINC Nanovna main function is used for antenna performance measurement. The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. firmware and hardware repository at github.comttrftechNanoVNAPackage include NanoVNA host with batterywithout case x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1.

2022 Upgraded Version The NanoVNA-F V2 has been upgraded on the basis of NanoVNA-F to lastest Firmware 0.4.0, and the operation page is compatible with Nanovna-F. It can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart, DELAY, POLAR, LINEAR and so on. Improved Frequency Range The NanoVNA-F V2 measurement range is 50KHz-3GHz, which is lager than the old versionprevious is 10KHz-1.5GHz.The TXRX method can measure the complete S11 and S21 parametersS21 dynamic ranges 70dB 1.5GHz, 60dB 3GHz S11 dynamic ranges 50dB 1.5GHz, 40dB 3GHz. New Design The Anterna analyzer uses all-aluminum alloy cases, which are sturdy and durable and can effectively shielded electtomagnetic interference to ensure measurement accuracy. The radio frequency interface is SMA, which is convenient for connecting various types of measurement. 4.3 inch screen 5000mAh Battery This vector network analyzer has a 4.3-inch IPS TFT LCD and resistive touch screen with resolution of 800480, an large viewing angle. It is upgraded to 5000mAh large-capacity lithium batteries has longer standby time, up to 7 hours, which can be used for a long time. Use a 2A large -current charging IC, the charging time is shorter. As an add-on, the built-in 5V output is for Android phone or tablet charging. PC Android Phone Controlled Using PC software NanoVNA Saver, it can connect to the NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone snp files for various radio design and simulation software through PC software. Supports Android Mobile Phone only.

The NanoVNA-SAA-2N developed by Hugen. AURSINC is the only seller selling authentic product, please kindly know. AURSINC provide product technical services and lifetime customer support.. Upgraded Version Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier. 3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specificationsplease refer to below path to get the firmware updated drive. google .comdrivefolders1Lr7AOTg2pAhYBZDfaiPVZTMZkFO14PMj. The SAA-2NNanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2NNanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device. Transmission Mearsure S21 70dB50KHz-1.5GHz, 60dB1.5GHz-3GHz. Reflection Measure S11 -50dB50KHz-1.5GHz, -40dB1.5GHz-3GHz Antenna Analyzer 1.00550KHz - 1.5GHz, 1.021.5GHz-3GHz Flip Display, you can flip the display for your convenience usage. NOTE The new batch of SAA2N analyzers have been upgraded to the laser labeling on the control dashboard, so you might find it difficult to read at the first sight, the former labeling is easy to fade after long-time usage, and we are still working on it. PC Connection the device can be controlled by PC via VNA-QT software,supported for Linux, Windows 7, Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files.

Unit is designed to fit for Original Equipment, form and function Simple and practical PC control software, you can export Touchstone snp files for various radio design and simulation software through PC software.. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.. Requirements accomplished by leveraging Spectra Premium's OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change.Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.. This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring..

New Upgraded Version Compared with old version NanoVNA, it save more costs with the addition of ABS casing and the new packaging. Hot stamping technology and plastic inner protection reduce the problems caused by transportation shocks and other processes. Support time domain analysis function TDR.. USB-C to USB-C Support USB-C to USB-C line, more convenient to connect to mobile phones. Compatible with most Android phones with the same screen display doesnt support for iPhone. Solve the problem of small screen, insufficient brightness and so on. Besides, the battery usage can be displayed on the interface.. Wide Range Frequency The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. Unit is designed to Original Equipment OE fit, form and function Simple and practical PC control software, you can export Touchstone snp files for various radio design and simulation software through PC software. The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, please manually replace the transceiver port wiring. Other details have been improved.. equirements accomplished by leveraging Spectra Premiums OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change. Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations..

The RF Demo Kit is a NanoVNA RF test board independently designed by BH5HNU, with a size of 10 10CM. Tiny but Mighty 18 functional modulesThe board is totally integrated with 18 functional modules.Can be used to measure 30MHz short wave low-pass-filter LPF,100MHz FM high-pass filter HPF,433MHz commonly used SAW band pass filter BPF,6.5MHz ceramic trap BSF. The test parameters of the 18 patterns of the test board are described as follows. Two steps must be performed before testing Step 1. Connect the two 20CM SMA to IPEX adapter cables to the NanoVNA-F machine. Step 2. Recalibrate the machine using the 13 Short, 14 Open, 15 Load, and 16 Thru circuits on the test board, and save the parameters to SAVE 0. Package Included 1x PCB RF tester board, 2 x 20cm adapter cables.

Upgraded Nanovna-F HW3.2 Version This Nanovna-F Vector Network Analyzer is the 2022 latest HW3.2 version,10KHz-1.5GHz measure range, 4.3 inch LCD touchscreen. Compared with HW3.1 version, the antenna analyzer is new added RTC circuit, changed ordinary keys to rotary encoders and optimized the S21 insertion lossfilter measurement performance, with a larger dynamic range.It can provide outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.. 4.3 Inch Touch Screen Rotary Encoder DesignThe Deepvna 101 antenna analyzer with 4.3-inch TFT LCD and resistive touch screen, added brightness and time calendar adjustment functions. The unique rotary button adjustment menu makes your operation easier than other nanovna analyzers, which can let you operate and see the data more clearly, give you a better using experience.. High Quality The nanovna is made of aluminum alloy material,can reduce the external interference and improve the measurement accuracy.. Support PC Android Phone ConnectThis NanoVNA analyzer can be controlled by PC using software VNA Saver.It can export Touchstone snp files for various radio design and simulation software through PC software.The software has a number of features such as it can save up to about 1000 sets of snp file data and takes 301 measurements across a sweep and combine the results to get a higher resolution sweep.. Exquisite Design Multi Application Our Nanovna-F comes with desktop stand and carrying case,allows you to operate and carry easily. With the vector network analyzer, you can easily measure the S-parameters of the circuit, transmission test, reflection test, insertion loss, return loss, fault location TDR function, antenna standing wave, impedance, filter response and so on..