5 Star Rfid Reader Writer Duplicator Copier

Easy reading and writing no need to connect computer software, one-key reading and writing, automatic identification of card model and frequency, accurate operation prompts.. Excellent decryption performance realize efficient decryption, editing, analysis, etc., and also support special functions such as card package and one-key encryption.. ID IC full frequency range support 13.56MHz, 125KHz, 175KHz, 250KHz, 300KHZ, 375KHZ, 500KHz, etc. The front and rear dual induction areas are more compatible the front induction area only supports IC frequency.. Independent NFC simulation function not only supports reading and writing of proximity cards, but also allows mobile phones, bracelets and other NFC-enabled devices to simulate encrypted IC cards with one key, allowing you to go out without a card.. Rewritable Realize the IC card M1 to restore the default key, clear all data used by the CUID card, this function can realize repeated erasing and rewriting. Connect your computer and mobile phone for quick upgrades..

ONLY duplicates onto Keysy branded rewritable KeycardsKeyfobs one included.. Copy up to 4 RFID Key Fobs or Key Cards 125kHz into the Keysy Remote.. Keysy can then emulate these credentials when placed in front of RFID reader.. Save time, money and avoid dealing with the building management. Additional Rewritable Key Fobs sold separately.. NOTE If you are not sure if your key fob is compatible contact Tiny Labs before purchasing..

RFID Reader WriterYou will get 1 x RFID Copier Without Battery, 6 x Writable Key Tags, 6 x Writable Cards EM4305, 1 x User Munual. The RFID Copier Size Approx. 11.5 x 7 x 3cm 4.6 x 2.8 x 1.2in.. Supports Frequency Reading and WritingPlease note that this card readerwriter only supports 125Khz EM4100 EM410X cards or tags. Copy Times 20,000 Times. Adopting advanced chip, product integration is higher, more stable and reliable. Supports Frequency Reading and WritingPlease note that this card readerwriter only supports 125Khz EM4100 EM410X cards or tags. Copy Times 20,000 Times. Adopting advanced chip, product integration is higher, more stable and reliable.. Easy to UseOnly Read and Write two buttons, easy to operate. Excellent program algorithm and circuit design reduce the power consumption and prolong battery life,2 x AAA battery is needed Battery is not included in the package.. Widely UsesThis device is used to copy and duplicate the 125 Khz EM4100 ID Card for backup purpose. Excellent program algorithm and circuit design are adopted. You can copy all IDEM4100 Cards with this RFID copier. Portable size, easy to carry..

3.2inch HD color screen display, English voice, 4AAA batteries poweredNot included in order, easy to carry, simple operation.br. Muti-frequency Multi frequency read and write, including IC or ID changeable card.br. It can used to copy low level IC ISO14443A encrypted access control card by using our decoding software. But higher level encryption card like hotel card, credit card, bank card...can not be copied.br. We provide some keys, anti-metal sticker and card for you to copy. Before using the them, please note the frequency of them is ID or IC..br. If you are not sure if your card can be copied, please contact with us before buying the copier, avoid to wasting your time.br.

3.HF antenna s 4.MMCX antenna cables 5.Micro-USB cable for Connecting Proxmark to PC 6. white PVC card. Firmware version V2 Improvement More information Improved antennas LF antenna,. The Proxmark including hardware and software is open source and can be readily analyzed and inspected. The Proxmark is simpler and therefore easier to understand.. firmware software and others question please contact us.

High Efficiency Decoding This RFID reader supports for IC, for MF1, for S50, for ID, for TK4100, for HID26, for HID35, for HID37, for 125KHZ13.56MHZ for high efficiency decoding, editing, analysis, etc, which also supports card packs, one piece encryption and other special functions.. Support For ID IC Full Band This RFID reader supports almost all blank copy cards including for uid, for Fuid, for Cuid, for Zxuid, for Euid, for Icuid, for E5500, for E5550, for T5577, for Em4305, for El8265, for 5200, for 6200, for 7200, for 8200, some for Cuid cards.. Independent NFC Simulation Function This RFID reader allows mobile phones, bracelets and other NFC enabled devices to simulate encrypted IC cards, such as hotel cards, door cards and lift cards, to easily achieve a cardless life.. Support For Partial Encryption Cards For T5577 This RFID reader supports partial encryption cards for T5577 this is a huge technical update, which cannot be done by other machines on the market at the moment, but the operation is more complicated and needs to be detected at the access control reader.. Mobile Phone Connection Run the software app on your smartphone and use our OTG unit to connect the card reader to your mobile phone, you can decode the encrypted card on your mobile phone anytime, anywhere and conveniently output the decoded data to easily go out without a card..

It can copy TM card ,item Tm1990a, DS1990RW1990ds1990A-F5,TM1990A-F5,DS1990R-F5.. It is easy to operate, convenient , and just need three seconds to copy successfully.. Small size , with buckle , easy to carry , batteries3PCS7 batteries.. This copy machine it also Support copy card ID card 125khz,like EM4100. It could copy EM4100 into EM4305 or T5577 throug this zone in the ..

Wifi Decryption no need To connect to a computer. This Machine Only Supports ld Frequency 125khz, 250khz, 375khz, 500khz, 625khz, 750khz, 875khz, 1m Hid-125khz and IC Frequency 13.56mhz. PLEASE BE SURE TO CONFIRM THE DETAIL BEFORE PURCHASING. Package Includes Each package contains a host, 10 x T5577 RFID cards, 10 x T5577 key fob tags125KHZ and 10 x 13.56MHz UID key fob tags. The items are complete and can meet your usage needs, you can also share them with your friends and family. Handheld Portable Rfid id card reader measures about 170 x 60 x 31mm 6.7 x 2.4 x 1.2 inch. Suitable size is easy and convenient to operate and carry for outdoor using. Independent NFC Let mobile phones, bracelets and other devices with NFC function simulate encrypted IC cards with one key, and easily realize the card-free when going out. Wide Applications Handheld RFID reader writer widely applying for door access at home, school, office, factory and shipping mall security entry, etc.

Applications This device is used for copying most of access control card, elevator card, rental house access card, attendance card, parking card, etc. in the market. Can not be used for copying bank card or other illegal purpose.Working frequency 13.56MHz ISO1443AIC type-A, 125KHz, 175KHz, 250KHz, 300KHz, 375KHz, 500KHz, 625KHz, 750KHz, 875KHz, 1000KHZ.. Functions Supports to read, write, edit, detect, NFC simulate, etc. Supports to use software or mobile phone APP to decode card. Supports format card, importexport card data, modifyanalysis data, etc.. ID Low frequency function Supports to read and write ID full-frequency cards. Supports to read pass through firewall card, such as AIDPIS026375500, 8678, 8268, 8310 card etc. Supports to read HID card and CIDBIDGIDSID special card. Supports to read and write T5577, 5200, EM4305 card.. IC High frequency function Supports to read full-encryption and semi-encryption IC card. Supports to decode full-encryption and semi-encryption IC card. Supports to read GDM anti-rolling code card. Supports to read and write UID card. Supports to read MF Classic 1K card. Supports mobile phone and bracelet NFC simulation.. Applications This device is used for copying most of access control card, elevator card, rental house access card, attendance card, parking card, etc. in the market. Can not be used for copying bank card or other illegal purpose..

Compatible with hid proximity card, RFID 125khz ID EM4100, T5577T5577 card and keyfobs. NOT working with encrypted tags, DuoProx II HID,iCLASS CARD HID,MICROPROX TAS HID and so on.Card types not mentioned in the description are not suitable, please read the product description carefully before purchasing.. Handheld Portable 125KHz RFID ID reader writer125khz copierduplicator,mini size easy and convenient to operate and carry for outdoor use.. Handheld RFID reader writer widely applying for door access at home , school, office,factory and shipping mall security entry,etc.. Notes-- the RFID reader writer can't work with HIiD Mode ,such as 125HZK PROX II,125HZK PROX III, HIXD ICLASS ,all these can not be copied.Also the encrypted 125khz Card can't be reader ,before order this please make sure your tags mode if it could be compatible.. Only Read and Write two buttons, easy to operate. Excellent program algorithm and circuit design reduce the power consumption and prolong battery life,2 x AAA battery is needed Battery is not included in the package.Independent operation, no need to connect to a computercomputer. Built-in separate LED indicator and buzzer indicator. Built-in transceiver antenna..