5 Star Sdr Dongle

Includes 1x RTL-SDR Blog brand R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle V3 Dongle Only. Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.. Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth 2.4 MHz stable. HF reception below 24 MHz in direct sampling mode with reduced performance. Please note RTL-SDR dongles are RX only..

Contains RTL2832U interface IC and the new, improved R820T2 tuner This tuner has improved sensitivity and SNR compared to devices using the R820T. Unmatched price-performance.. Contains all the same improvements on the 'generic' design as were made on the popular and well-tested NESDR Mini, including higher-accuracy clock, low-ESR capacitors, high-Q inductors, and more. 1-year warranty direct from Nooelec With locations in both the US Canada, and full technical support services, your investment is a safe and wise one.. Frequency capability is approximately 24MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with the Ham It Up upconverter sold separately.. Free high-quality telescopic antenna, much improved over the older thin-whip style antenna. Turn on, tune in and...listen.

Frequency Range Dual Band 978MHz 1090MHz Gain 5dBi. Antenna Connector SMA Male Connector Accessoried Connector Adapter MCX Plug to SMA Female Connector Adapter. Feature Magnetic Base Mounting Impedance 50 ohm Direction Omni-directional. Package List 1 x Antenna, 1 x Connector Adapter As the Picture Shown. Compatible with RTL SDR Software Defined Radio SDR ADS-B Receiver USB Stick Dongle Tuner.

Frequency RangeMHz 1090MHz. connector Adapter MCX Female to SMA male Cable Length 1 Meter Gain dBi 2.5MAX. Feature Magnetic Base Mounting Impedance 50 ohm Direction Omni-directional. Compatible with used for Software Defined Radio Aviation ADS-B Receiver ATSC DVB-T DVB-T2 TV Radio USB Stick Dongle Tuner. Package Content 1 Piece 1090Mhz Antenna with 1 Piece MCX Female to SMA Male Adapter.

Includes 1x RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit. Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.. Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth 2.4 MHz stable. HF reception below 24 MHz in direct sampling mode with reduced performance. Please note RTL-SDR dongles are RX only.. Comes with our portable VHFUHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception..

Turn your computer, phone or tablet into a radio scannerham radio receiver that can receive nearly all RF signals Compatible with Windows, Mac OS, Linux, and Android. NESDR SMArt RTL-SDR v5 can be used for the reception of broadcast AM radio, broadcast FM radio, shortwave radio, CB radio, public security radio, trunked radio, air traffic control, ACARS plane-ground communications, ADS-B plane tracking, AIS ship tracking, POCSAG pagers, NOAA and GOES weather satellites weather images, weather balloons, radiosondes, DAB radio, DVB-T video, Inmarsat, Iridium, and so much more. The best-performing low-cost RTL-SDR available anywhere Compared with RTL-SDR v3, HF SNR is improved by up to 15dB, VHF UHF SNR is improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz. v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna sold separately, product ID B08HGSYB7R or B00R09WHT6. Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience sold separately, product ID B076CYK8XZ. Your purchase includes a NESDR SMArt v5 RTL-SDR. For a version which includes an antenna set, see product ID B01GDN1T4S. Proudly built by Nooelec in the USA and Canada Full 2-year product warranty and product support through our support portal at httpssupport.nooelec.com. Full datasheet available httpswww.nooelec.comdatasheets100701.

Turn your computer, phone or tablet into a radio scannerham radio receiver that can receive nearly all RF signals Compatible with Windows, Mac OS, Linux, and Android. NESDR SMArt RTL-SDR v5 can be used for the reception of broadcast AM radio, broadcast FM radio, shortwave radio, CB radio, public security radio, trunked radio, air traffic control, ACARS plane-ground communications, ADS-B plane tracking, AIS ship tracking, POCSAG pagers, NOAA and GOES weather satellites weather images, weather balloons, radiosondes, DAB radio, DVB-T video, Inmarsat, Iridium, and so much more. The best-performing low-cost RTL-SDR available anywhere Compared with RTL-SDR v3, HF SNR is improved by up to 15dB, VHF UHF SNR is improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz. v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna sold separately, product ID B08HGSYB7R or B00R09WHT6. Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience sold separately, product ID B076CYK8XZ. Your purchase includes a NESDR SMArt v5 RTL-SDR, a magnetic antenna base with a 2m 6.5' RG-58 feed cable, and 3 different antenna masts for UHF and VHF operation, including a variable-frequency telescopic antenna. Proudly built by Nooelec in the USA and Canada Full 2-year product warranty and product support through our support portal at httpssupport.nooelec.com. Full datasheet available httpswww.nooelec.comdatasheets100700.

Includes 1x RTL-SDR Blog V4 R828D RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit. Several improvements over other brands including use of the R828D tuner, built in HF upconverter, improved component tolerances, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, aluminum shielded case with thermal pad for passive cooling, improved filtering, activatable bias tee circuit and a much improved antenna set.. Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth 2.4 MHz stable. Please note RTL-SDR dongles are RX only.. Comes with our portable VHFUHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception.. NOTE The RTL-SDR Blog V4 requires a driver update. Please follow the installation manual carefully Reviewers that mention receiving no signals have not followed the instructions.

Included Nooelec USB dongle antenna. RTL2832U interface IC R820T tuner IC on USB dongle. These are custom USB devices tuned for SDR and include much better components than generics. Full 1-year warranty installation support available.

10KHz-2GHz WIDE RANGE Users can use SDR software to receive 10KHz-2GHz electromagnetic waves, 12-bit ADC and 10MHz real-time bandwidth, super powerful range and wide coverage.. STABLE AND GOOD PERFORMANCE The SDR receiver is made of Msi001 and Msi2500 main chips, and the radio performance is stable. It is a very practical receiver choice.. APPLICABLE MODEL This SDR receiver supports AM, FM NFM, WFM, CW, DRM, SSTV demodulation, very wide range of use.. SUPPORTING SOFTWARE This SDR radio receiver also supports SDRuno, HDSDR, SDR consol, GNUradio, SDR Touch and many other software.. CUSTOMER SERVICEIf you are not completely satisfied with the purchase or the product, please do not hesitate to contact us in time, and we will solve the problem for you as soon as possible..